Nd: YAG supplied by Arsuf Lasers
When coming to source an Nd: YAG (Neodymium Doped Yttrium Aluminum Garnet) laser rod, there are a few parameters to be considered and scaled, such as which one is more important for the application.
How to grow Nd: YAG Crystal
There are 2 ways to grow Nd: YAG crystal: resistance or inductance chamber. While one yields more energy, it shows a lower extinction ratio and more Interference fringes. While one is repairable, the other one is not, since energy is decaying with use. One is good for a high repetition rate and the other for a low one.
Arsuf Lasers’ rod manufacturing is an end-to-end solution.
That means we grow Nd: YAG crystal boules according to customers’ specs.
- We guarantee consistency, fast delivery, and stock material, enabling us to offer stable and competitive pricing.
- A high level of polishing and our hard coating process complete the production circle.
- Arsuf Lasers also provides engineering support and failure analysis, free if needed.
Fill in the contact form and let us know about your needs.
Nd: YAG Laser Rod — Technical Specification
Purpose: Gain medium for Nd: YAG laser system (emission wavelength ~1.064 µm). Suitable for pulsed (Q-switched) and CW operation.
1. Material & Dopant
- Material: Nd: YAG (Yttrium Aluminum Garnet host) optical grade.
- Dopant Ion: Nd³⁺
- Dopant Concentration: 0.6–1.2 at%
2. Dimensions
- Shape: Cylindrical rod, end-faces flat and parallel.
- Diameter: 1-15 mm (±0.02 mm)
- Length: 10–225 mm (±0.5 mm)
- Edge Bevel: 0.75-0.125 mm x 45°
- Edge Finish: Fine grid (400 Mesh)
- Edge Chips: 0.125 mm max (not to exceed bevel diameter)
- Barrel Finish: Ra = 1.6 ±0.02 µm
3. End Surface Finish
- Type: Flat/Flat or Flat/Radius (e.g., 1 meter)
- Parallelism of End Faces: ≤ 5 arc sec
- Scratch-Dig: 10-5 (Side 1 & 2)
- Flatness: λ/10 @ 632.8 nm
- Perpendicularity: ≤ 5 arc minutes
- Wavefront Error: ≤ λ/16 per inch @ 632.8 nm
- Quality Standard: Per MIL-PRF-13830
4. End-Face Coatings & LDT
- Coatings: Optional AR, HR, or PR @ 1.064 µm.
- Angle of Incidence (AOI): 0° (Normal)
- Coating Examples:
- AR @ 1064 nm: R ≤ 0.2% per surface
- HR @ 1064 nm: R ≥ 99.8%
- PR @ 1064 nm: R = 80-95% ±1% (Typical)
- Coating Type: IBS, IAD e-beam.
- Laser Damage Threshold (LDT): ≥ 25-40 J/cm² @ 1.064 µm (10 ns pulse)
- Documentation: Coating test data and measured reflectivity/absorption curves provided with delivery.
5. Traceability, Packaging & Warranty
- Traceability: Each rod is serialized. Includes QC dimensional report (parallelism, perpendicularity, etc.) and coating test reports.
- Packaging: Vibration-damped boxes.
- Lead Time: 8 weeks (Typical)
- Warranty: 12 months against manufacturing defects.
More Information
Nd+3: YAG Laser Crystal
ND:YAG (neodymium-doped yttrium aluminum garnet) is a crystal that is commonly used as a laser medium for solid-state lasers. The “Nd: YAG” part of the name refers to the fact that the crystal is doped with neodymium ions, which provide the energy needed for laser operation. The “YAG” part of the name stands for yttrium aluminum garnet.
The Nd: YAG laser crystal is a very efficient laser medium and is used in a wide variety of applications, including laser cutting, laser welding, laser drilling, and laser ablation. It can also be used to generate high-power pulses of infrared light, which are used in verify scientific and industrial applications.
It is a common laser crystal for Q-switched lasers, which is the most common laser for laser tattoo removal, pigmented lesion removal, and hair removal.
Additionally, ND+3: YAG lasers are also used in medical procedures to perform thermal ablation, in which laser energy is used to destroy small tumors or other abnormal tissue
Frequently Asked Questions
According to the technical specification, a detailed report is supplied to the customer.
No, as all crystals are processed on the same line, the main difference lies in the LIDT requirements (Laser Induced Damage Threshold) determined by the rod's energy density.
Replacement depends on usage, maintenance, and industry, similar to car mileage.
Arsuf is capable of selecting diverse manufacturing and coating processes to maximize crystal quality, efficiency, maximal energy output, above-average lifetime, and high damage threshold. The entire process is performed in-house, leveraging multiple supplier capabilities to ensure the highest customer satisfaction—free from the constraints of a single-supplier approach.
Product warranty is provided by Arsuf, enabling selection from multiple manufacturing and coating technologies for the best outcome.
Commitment to Quality Excellence
At Arsuf Lasers, we are proud to uphold the highest standards in quality management, as demonstrated by our ISO 9001 certification. This certification reflects our ongoing commitment to excellence, ensuring that every process we implement meets rigorous international standards. Our dedication to quality allows us to consistently deliver precise, reliable, and innovative laser solutions that meet the evolving needs of our clients.
Click the certificate image below to view our ISO 9001 certificate.
Get in Touch with Our Technical Team
Leave your details and we will get back to you

All you need to know about Nd:YAG Laser
What is Nd:YAG Laser? Neodymium-doped yttrium Aluminum garnet (Nd-YAG) crystal is a common lasing medium used in solid-state lasers. It has been used and researched since 1964.

Gain media for solid state lasers— Doped glasses compared to doped crystal
Solid-state lasers are based on gain media such as glass or crystals. Both glass and lasers are used by optically pumping them with light, allowing


